ESHOP / INHALERS / H2-600M
inh.1.jpg
42C36D0F-ABDC-43FB-9A61-8C8788F8EBA8.jpg
8CC26DEE-0C0C-41A5-A1F9-DA4096AC686A.jpg
inh.1.jpg
42C36D0F-ABDC-43FB-9A61-8C8788F8EBA8.jpg
8CC26DEE-0C0C-41A5-A1F9-DA4096AC686A.jpg

H2-600M

he inhaler for hydrogen and oxygen uses one of the most advanced technologies in the world - a solid polymer electrolyte using titanium electrodes. When turned on, the device uses electrolysis to split water into hydrogen and oxygen.

Inhaler for hydrogen and oxygen

dimensions: 365x235x400 mm
weight: 15 Kg
purity of hydrogen: 99,99%
maximum hydrogen flow rate: 600 ml/min
oxygen purity: 99,99%
maximum oxygen flow: 300 ml/min
possibility of inhalation: H2 or O2 or combination
pressure stability: 0,001 Mpa
power supply: 220 V ± 10 % 50 to 60 Hz
power consumption: 1 200W
lifespan: 8 000 hours

The H2-600M inhalation machine for the production of molecular hydrogen and oxygen uses one of the most advanced technologies in the world - solid polymer electrolyte (SPE) using titanium electrodes and distilled water as an electrolyte. The oxygen content is less than 0.1 ppm. Hydrogen is produced at the cathode and oxygen at the anode. When turned on, the device uses electrolysis to break down water into hydrogen and oxygen. The gas generator separates hydrogen and oxygen at two electrodes. Pure hydrogen gas goes to a gas/water separator that removes most of the water vapor from the hydrogen gas. Oxygen is collected in a water tank. The hydrogen will pass through a drying tube to obtain hydrogen gas of higher purity. SPE hydrogen/oxygen generator adopts an automatic control system with high sensitivity. Both flow and pressure are relatively stable. The pressure stability is less than 0.001 MPa, which ensures the production of high-purity gases and safe conditions.

Only distilled water of laboratory or food quality can be used. This is not technical distilled water.

The H2-600M inhaler uses state-of-the-art MEA/PEM (Membrane Electrode Assembly/Proton Exchange Membrane) technology, which is manufactured in the USA.

The device complies with Directive 2015/863/EU RoHS (Rescriction of Hazardeous Substances). Imports comply with EC Regulation No. 1907/2006 or REACH on the Registration, Evaluation, Authorisation and Restriction of Chemicals.

In stock: 0 pcs
For more information, contact the merchant by phone or email.
Recycling allowance (without VAT) 0,16 €/pcs